This 20 iMac installation manual pages will show you how to install iMac Intel "20" EMC and 2133 2210 Video Card replace a defective video card to bring the graphics of your iMac up to speed. In this manual, you'll find imac 42 steps to follow to install the video card iMac with success
Step 1-access door
Loosen the Phillips screw in the center of the single door access. This screw is captive in the gateway. Remove the gateway from your iMac.
Step 2 – glass panel
The glass panel is fixed on the front with fourteen magnets around the perimeter. Two suction cups stick to opposing corners of the glass panel. To connect the suction cups that we sell, first position the suction pad with handle mobile parallel to the face of the glass plate. Taking the sucker
against the glass, raises his hand moving until it is parallel with the other handle. If your suckers refuse to stick, try cleaning the glass panel and the suction cup with a mild solvent like Windex
Phase 3
Gently pull the glass panel upwards out of the iMac. The glass panel has different pin positioning around the perimeter. To avoid these pins off the glass panel, be sure to only shearing pull upwards during removal. Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstalling, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.
Advertisement:
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.