0 Installing aluminum PowerBook G4 12-inch 1-1.5 GHz keyboard

see and read about installing aluminum PowerBook G4 12 "1-1.5 GHz keyboard that is also available for download as pdf files. Here you could see also installing aluminum PowerBook G4 12 "1-1.5 GHz keyboard content using google docs service. If you are having trouble reading this installation aluminum PowerBook G4 12 "1-1.5 GHz keyboard, please do not hesitate to contact us using contact form soon and report broken links and other problems that may occur.

Step 1 — Battery use a coin to turn the battery lock screw to 90 degrees to the right. Lift the battery from the computer.

Step 2 — screws to Remove four Phillips EMI finger from memory. Slide the memory door away from the memory compartment.

Step 3 remove the Phillips screw black next to the memory card. Remove the small finger EMI under the black screw.

Step 4 — keyboard
On the keyboard, remove the keys F1, F2, F11 and F12.
This is scary-take a deep breath before continuing. Put your index finger under the upper-left corner of the key and lift until you hear a click. Then, move your finger to the left edge of the key and lift up to pull the key out.

We are releasing the two tabs on the left of the key from two small holes in the plastic scissors mechanism. When you replace the keyboard keys, enter the key directly above the crack where to go and press down until you hear the click in place.

Download Installing aluminum PowerBook G4 12-inch 1-1.5 GHz keyboard

Advertisement: