Friday, November 2, 2012

0 1994 Cadillac DeVille Concours procedure to disable lighting the service indicator after installing passive Struts/shocks

A wire run turned (heat in the run) source of ignition relay pin 85. 1992-1993 Oldsmobile Achieva with computer command ride (CCR) is this a stand alone system. Remove the CCR module on the back of the range sound insulator right (passenger side) is connected. Tracking the wiring under the dash board and then cut and glue the cabling. Command ride (CCR) is a stand alone system 1992-1994 Buick Skylark with computer.


Remove the CCR module on the back of the range sound insulator right (passenger side) is connected. Tracking the wiring under the dash board and then cut and glue the cabling. 1993-1996 Buick Park Avenue with computer is ride (CCR) command a stand alone system. Remove the CCR module located under the carpet under the driver's seat. 1991-1995 Oldsmobile ninety eight computer command ride (CCR) is a stand alone system. Remove the CCR module located under the carpet under the driver's seat. 1994-1999 Pontiac Bonneville with computer command ride (CCR) are still available the feedback strut/shock assemblies for these vehicles. However, the customer wishes to reduce the cost of repair, can these steps be taken to allow installation of non-feedback-assemblies and disabling the malfunction indicator. This is a stand alone system.


Download

Advertisement:

0 comments:

Post a Comment

Note: Only a member of this blog may post a comment.

 

2012 BY ManualTransformerOnline Manual Sharing