Replacing the front wheel (hub) (base) Note! Camp cannot be dismantled. Do not wash, camps. Remove brake disc (brake line remains connected), refers to the brakes and controls; Disc brake system. Remove ABS sensor pulse. Remove the balancer connection of the stabilizer, steering and suspension. Open the nut. Installation: use the washer (1). Tapered tap and bore without grease. Replace samozap?vasi. A brace of Hexagon socket if necessary. Tightening torque refer to steering specifications. Click outside the track rod with a special tool 31 2 240.
Mark the installation position of the spring strut tube (1) into the swivel bearing (2) with paint-never marked with describing the tool. Marking is not required if the factory is still identified. R installing position of the right spring strut tube L installation position left of the spring strut tube version with factory markings over a roller bearing. Open the nut. Expand the swivel bearing with special tool 31 2 200 and pull the swivel bearing down. Installation: Click spin bearing up to stop the winch seminar and Note the marking of installation position. Replace samozap?vasi. Tightening torque, refer to suspension specifications open the screws and remove the wheel bearing. Assembly: contact person (2) of the wheel bearing and rotating camp and threaded bores (1) must be clean and free of grease. Tightening torque, refer to suspension specifications
Advertisement:
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.